|
Applications – Customized Solutions
SVS Radio Control Systems are used in the most
diverse applications.
Whenever
you need to remotely control functions like
turning, lifting, pumping, vacuuming,
opening, closing, or alarming, you will be
able to use our products.
The applications cover a vast area, ranging from a
simple garage door opener or lighting
control over to the medical technology
environment or the highly sensitive field of
pyrotechnics.
The range of applications is almost
boundless, so that our SVS products are
never subject to one only specific task. For
many customers however,
the stand-alone features
are of great relevance for the marketing of
their own ideas. Often just an individual
customized label
is sufficient to adapt a transmitter, for
example, for a customer application.
The Series SH-7 C and SH-10 Hand-held
Transmitters are especially prepared for
this purpose. Similarly, the Transmitters
SHT-77 and SHT-107 can be modified and
converted into customized 4-, 5- or
6-channel devices. The cost-effective
adaptation of licensed products is an
advantage that is already available in small
production series starting with 25 units.
If you are already benefiting
from this technology, we would be glad to
work with you on your next project or new
ideas.
|
 |
|
Transceiver-Module –
Development and Engineering Services
Generally, transceivers are intended for
bi-directional signal transmission. However,
in different cases and for various reasons,
there are unidirectional applications where
the use of bi-directional modules is
definitely advantageous
Ideally, when planning the use or the integration of
a circuit, the user should know the HF-characteristics,
the technical requirements and the necessary
EMV licensing regulations, so that the best
choice and optimal adaptation of the
adequate radio modules can be done. Another,
non-irrelevant factor is the tuning,
installation and orientation of the antenna.
In the following, we describe some examples
with its corresponding radio solutions. |
 |
|
The
Transceiver Module CS-8
is intended for time-critical applications
because of its extremely short switching
time between transmission and reception
operation modes and its high transmission
rate. The integrated synthesizer allows free
programming of a radio channel within the
ISM band of 433,05 – 434,79 MHz! The CS-8
can be adapted individually to the
application’s corresponding requirements.
|
