|
 |
CX-12 T | Transmitter module with acknowledgement |
The Transmitter Module is used to convert into radio signals any digital switching signals generated by customer designed equipment or circuitry.
By routing the input signals D1 through D4, the transmitter module gets activated and transmits the available data together with one analog value.
- RF Transmission with very low risk of distortion
- 2 selectable frequencies
- 4 digital and 1 analog input
- 2 LED control outputs (function and status of receiver supply)
- 1 piezo control output
|
| Operating Frequency |
433.62 MHz or 434.22 MHz |
|
| Output |
4 x digital (control of 2 LED´s, 1 Piezo and supply management control)
1 x analog (filtered PWM of receivers RSSI) |
|
| Eingänge |
1 x digital (Frequency select)
4 x digital (D1 through D4, i.e. pushbuttons )
1 x analog value |
|
| Supply voltage |
2,0 – 3,6 V DC |
|
| Current consumption |
6mA (if RF connection with receiver is in order) |
|
| Dimensions |
31,4 x 15,2 x 3 mm |
|
| Temperature range |
-20 °C through +65 °C |
|
| |
|
|
| Ordering information |
CX-12 T |
Id.-Nr. 01280.00 |
|
|
|
|
Downloads 
