SHR-7 K4 | Multifunctional Receiver

The SHR-7 K4 was designed in such a way that its functionality can be adapted to a wide variety of applications when being installed.

Each radio signal sent by the transmitter of the series SH-7 can switch on or off one or several of the 4 isolated change-over-contacts.

The function assignment for the transmission keys or codes is done via a configuration panel.

The signal/function assignment allows at the same time to perform additional lock functions or to connect external impulse, code or key switches.

The relay function– impulse, timer, switch or toggle operation – and its falling edge delay from 0,1 s to 60 min can be selected via DIP switches for each of the 4 isolated relay change-over-contacts.

We deliver the SHR-7 K4 complete with case IP65/IP54 and built-in bracket-antenna ready to be connected. If you need to cover long distances, the multifunction receiver may be upgraded or retrofitted with antennas and accessories from the SVS product catalog via a built-in BNC connector.
Case dimensions:	130 x 130 x 75 mm, Protection type IP65/IP54
Output:	4 Isolated change-over contacts
Switching power:	230V AC/6A or 30V/5A DC
Auxiliary outputs:	4 Transistor outputs 20mA (max.)
Antenna:	Bracket-antenna, placed inside; BNC-connector for optional exterior antenna (not included)
Temperature range:	-20 °C to +65 °C
Power supply:	12V – 24V AC/DC or 230V / 50Hz
Current consumption:	App. 20mA to 150mA (with 4 ON relays)
Connections:	Terminal clamps without screws

Ordering information:	Multifunction Receiver SHR-7 K4; in AP case, with bracket-antenna located inside	Id.-Nr. 00378.40

Accessories:	BNC connection set	Id.-Nr. 00069.01
	Multiflex antenna	Id.-Nr. 00069.00
	Gainflex antenna, 2dB	Id.-Nr. 00070.00
	Antenna with magnetic foot, 3dB	Id.-Nr. 00068.10