|
|
 |
SHR-7 L3 | 3-Channel Receiver |
The SHR-7 L3 receiver is configured for direct connection to a 230V / 50 Hz power supply.
The function of the 3 change-over contacts can be switched to impulse or wipe function operation. Consequently, the relays switch only during the activation of the push- button or they change between ON/OFF states with every impulse. Each switching signal sent by transmitter of the Series SH-7 controls one or more of the 3 isolated change-over-contacts.
A new feature is that for each of the 3 relays, the receiver can learn the transmission code and its corresponding key. The user can also use a combination of keys.
For each relay contact, 2 different transmission combinations can be stored. The Receiver SHR-7 L3 is therefore also suitable when the user needs to define several user groups or to protect several functions with a code (for example, opening of doors, alarm systems, etc.).
When defining transmission codes via DIP switches, you can use any number of transmitters to control one or more SHR-7 L3 receivers. To assure an interference-free operation when using inductive loads or high-frequency signals, the relay follow-up time can be extended up to app. 500 ms. |
| Case dimensions: |
App. 130 x 85 x 37mm |
|
| Output: |
3 isolated change-over contacts, 230V/6A or 30V/5A DC |
|
| Antenna: |
λ/4- wire antenna |
|
| Temperature Range: |
-20 °C to +65 °C |
|
| Power Supply: |
230V / 50Hz |
|
| Power Consumption: |
< 4W / 230V |
|
| Connectors: |
Clamp strip with screws |
|
| |
|
|
| Ordering Information: |
3-Channel Receiver SHR-7 L3 in AP case with wire antenna |
Id.-Nr. 00373.93 |
|
|
