R-12 portable receiver
Keep an eye on your call and alarm system, even when you are on the move. The portable receivers are in constant contact with the base/receiver unit and provide you with all the information required to follow up an alarm or emergency call immediately. The display shows you immediately where you are needed.
Keep an eye on your call and alarm system, even when you are on the move. The portable receivers are intended for staff and are in constant contact with the DMS-12 and/or Minicall 12 base and receiver unit. From there you are provided with all of the essential information, both acoustically and as plain text on the display. A call is sent to all of the receivers and displayed with the originator’s designation. Staff can take the call on a receiver and thus remove the call from all other receivers. The base unit indicates that the call is being dealt with. If the call is not reset at the corresponding alarm point within a set time, it is sent to all of the receivers again.
- Vibration alarm, acoustic and visual display (LED)
- OLED illuminated display
- Micro USB charging socket
- Special calls can be sent (e.g. if staff require additional assistance)
- Messages from the control centre can be received and displayed (e.g. to call the staff to a meeting)
Our call and alarm systems are characterised by their intelligent wireless communication. With extremely short response times, the frequency channel is tied up for a minimum amount of time. The special transmission characteristics familiar from the SH-12 wireless series ensure extremely low interference during operation. Thanks to this wireless transmission that is immune to interference, ranges of over 100 m can be achieved inside buildings, depending on the circumstances. At the same time, ergonomics and design bring an appealing external appearance and technology together in harmony. For strong, narrow-band interference or use of several parallel wireless systems, the working frequency can be set to meet individual needs. The R-12 is programmed with a serial number in the factory. This provides greater security and turns every call system into a unique network that can be distinguished easily.
We will be happy to provide you with individual advice on selection and design of your call and alarm system or integration of your components.
433,62 MHz to 434,22 MHz
approx. 71 x 55,5 x 26 mm
OLED with lighting
-20 °C to +65 °C
2 x 1,5V (AAA-rechargeable cells)
Scope of supply:
Receiver with attachment clip and rechargeable batteries
R-12 portable receiver
Impact and edge protection for R-12 (00050.00), USB-charger for R-12 (00035.70), CG service configuration and labelling for call and alarm systems (09100.86)